Door Handle Replacement
Door handles may seem like something minor, but if you dislike the style or design of them, or are unable to use them and use, you should consider replacing them. With a little patience, you can install a new handle in no time.
Most modern door handles have cover plates that hide the screws for an attractive appearance. However, you will need to attach them separately if your new handle does not already have them.
Remove the old Handle
The door handle is not just a decorative feature for your home it also serves as an important safety feature that lets you to lock and unlock your door. As time passes the door handle can begin to lose its grip or feel loose. It might also appear aged and worn. This is an indication that it's time for a replacement.
One of the first indications that your door handle requires replacing is if it's becoming difficult to operate. This is a problem because it means you can not lock or unlock your door which could be the risk of security for you and your family.
It's also a good idea to replace the handle on your door if it is damaged or broken. A damaged or broken door handle can be extremely dangerous, particularly in the event that your children or senior family members struggle to open it, and get trapped in the. It's a good thing that it's easy to fix a broken door handle by simply replacing the old one.
Modern door handles are generally standard sizes and should fit any door. If you're not sure if your new door handle will work, take off the old one and measure the holes in its housing. upvc replacement door handles will allow you to purchase the correct size door handle.
The most straightforward method to take off the handle from your door is to take it off of the door. This is usually done using a screw driver. However some door handles have an outer cover plate that hides the screws that mount them, so you'll need to pry off this to access the screws underneath. Once you have removed the old handle, make a note of how the spindle is positioned so that you can be sure to align it when you install your new one.
You can also remove the door handle by depressing the latch mechanism. This is usually done using the screwdriver, but you'll need to find the small latch, which should be on the edge of the trim piece. After you have removed the latch, take off the handle and the strike plate. Then remove the latch from the door's edge.
Take off the Strike Plate
When replacing your handle, you'll also need to replace the latch plate, which is the hole which the door's latch hooks into when it closes. The packaging that the new handles are packaged in will have two options for latch plates - a rectangular one and circular (see the diagram above detailing door handle parts). If your current latch plate is a rectangular shape, switch it to a round one, so that the latch hooks into the strike plate in a way that makes the handle more comfortable to operate.
The first step is to take off the screw that is holding the old latch plate. The screws are usually quite tight and require a lot of force to loosen them. If you can, it might be beneficial to have a second person help with this process.
After the screws are removed, the latch plate will slide out of the door easily. If the latch plate is stuck or doesn't move, use a small file to scrape the edges. This will sometimes free the plate up.
You can now move on to making the new door strike plate for installation. Screw the latch plate into the door jamb using the screws that came with the new handles. Be cautious not to tighten too much the screws, as this may damage the strike plate.
If you're unsure whether the latch plate is in the proper position You can try closing and then opening the door to determine whether it locks and closes correctly. If it doesn't you'll have to adjust the strikeplate either up or down, forward or back until the door shuts correctly.
If the door is moving or jiggling, then you may need to enlarge the latch hole in the strike plate. This is more common on older doors. It can be caused by wear and tear, hinges that are too narrow, the incorrect size of the latch or damaged strike plate. If this is the situation, follow the same procedure as adjusting the strike plate, but using a metal file instead of a chisel and hammer.
Removing the Latch
The latch is an angled metal piece that slides in and out of a hole in the inside of your door. The latch is moved forward when you turn the handle. It also catches a hole on the door frame so that the door is closed. If your door is wobbling when you close it, an upgrade to the latch could be the only thing needed to correct the issue.
The screws that secure the door latch are hard to spot, but you can usually put a screwdriver in a small hole in the trim plate and then pry the latch off. After you've removed your trim plate, it'll be easy to remove the latch as well as the remaining bolts that hold the latch and spindle in the position.
If the latch is not easily removed, use a paperclip or tool to take it off the handle mechanism. Insert the item into the recessed latch slot and gently twist it or jiggle until you feel the handle and latch begin to separate. You may have to repeat this process several times before you are able to pull the latch out.
After the old latch is removed, you should be able to move the new latch into the slot with no issues. Make sure that the latch is properly positioned in the slot and is aligned with the screw chambers and then use the new screws to secure it to the strike plate and door frame.
Before installing the new handle, be sure to measure your current backset (the distance from the centre of the large hole on the front of the door to the edge). Check that the latch size of the new handle is in line with the measurement.
You'll require a brand new cylinder for your lock if replacing the latch and handle or your existing one is damaged. If you're not changing the locks the new latch should fit in your existing recess, and work with your current keys. Make sure you select an entry point with a rectangular cover plate that match your old handles.
Removal of the Cover Plate
Door handles can start to look shabby over time However, if you replace them with a modern lever-on-rose design, it's an easy and quick DIY project to decorate and will improve the overall look of your home. You can purchase complete sets of escutcheons, the escutcheons as well as privacy adaptors and escutcheons.
To replace the door handle inside remove the cover plate (or rose), which covers the screws and inner mechanism. Utilize a flathead to take off the plate. It may have an opening on one edge or be held in place by pins.
Remove the screw holding the interior handle and set it aside once the cover plate has been removed. Remove the screws that hold both the inner and outer plates. You can loosen them with a Philips Screwdriver. Then, take the inner plates and latch plate from the door and put them aside.
Most doors have a gap between the door jamb and the inner edge of the frame that allows for a handle, but not all do. If yours does not allow for a handle, you'll have to drill a new hole through the door. This is the same procedure as opening a door locked, but you will have to be extra careful not to damage the frame or door.
After drilling the holes, you'll need to install new door knob screws. Make sure you purchase the same size as the old ones, so you don't end up with an handle that is either too tight or too loose. Installing a new strike rod and latch is also mandatory. They aren't included in most door handle sets.
If you're looking for a quality replacement set of interior door handles look no further than the Amazon's Choice FAERSI two-piece chrome-finished handle set. It's a factory-fit product and has been praised with hundreds of five-star reviews. It's a great choice to replace worn or damaged interior door hardware on your Chevy.